Wall Framing

Wall Framing requirementsFind the length of walls A,B,C,D
A wall has structural components. Name all the components and state their functions
What timber treatment is the bottom plate and why?
How do we set our wall frames? Use HBG Branz book to help answer the questions
Which nogs do we cut and nail later after we build our frames.
what are the nailing requirements for the wall frames.

Framing members

At what height did you place all your lintels and why
The lintels were placed at 2010mm height because

What points did you consider when setting out wall frames

Studs were spaced at 1200mm centre to centre for the cladding
Nogs were spaced out 800mm

How many nails did you use to fix studs to the bottom and top plates what size and finish
3 nails nailed on the side

Flooring

Heres a link for a flooring company :
http://www.thermakraft.co.nz/html_version/flooringproducts.htm

We had to make an template that would allow the foil to hand 100mm down. Once we made the template we rolled the foil across the joists and nailed em. We made sure the foil was running straight and touching the edges. If there were any holes then we had to go over the top again.
We then had to cut and measure the floor board and cut two parts to cover one half & the other 3 parts.
There was a nailing pattern for the flooring.